About us     Contact us   Membership
Technical Textiles Logo
Login | Register | My TT
Home > Automobile Textiles > Seat belt webbings
   Seat belt webbings  
 
Overview Supplier
Seat belt webbing:
  • Seat belts function as a safety harnesses which secure the passengers in a vehicle against harmful movements during collision or similar incidents.
  • Seat belts minimize injuries during accidents.
  • Seat belts are woven narrow fabric made from nylon filament yarns or high tensile polyester filament yarn.
  • The load specification is an important criterion for usage in vehicles.
  • According to the Government Notification under Central Motor Vehicle Regulation (CMVR) all four wheelers have to be equipped with front and rear seat belts.
  • Further, as per the Supreme Court Notification, all State Governments are expected to ensure that the driver and co-driver use the seat belts.
  • The usage and demand for seat belts increased after the above two notifications were implemented.
  • At nearby, the seat belts, which are used in the cars, are called three-point which has single continuous length of webbing. They are called three-point for the reason that these belts help spread out energy of the moving body in a accident over the chest, pelvis and shoulders.
  • Seat belts are classified as:-
    1. Static belts
    2. ELR (Emergency Locking Retractor) belts
Product Characteristics:
  • The seat belts are made from nylon filament yarn or polyester filament yarn which is woven to produce the webbing pattern.
  • The linear density of man-made yarns must be stuck between 100dtex and 3000dtex, preferably 550-1800dtex.
  • The filament linear density should be between 5dtex and 30dtex, preferably 8-20dtex.
  • A typical seat belt is made of 320 ends of 1,100 dtex polyester each.
  • The majority weft yarns prepared from polyester are 550dtex.
  • The critical characteristics of the webbing are:
    1. Abrasion resistance,
    2. Resistance to light and heat,
    3. Capable of being removed and put back in place easily and good retraction behavior.
    4. The load bearing capacity of seat belts is 1500 kilograms.
  • The exterior of the webbing (generally smooth) is of exacting importance for the reason that its construction and properties positively manipulate the retraction behavior.

 

Other Products of Automobile Textiles
 
Buyers at Technical Textiles
 
Advertisements
Nonwoven Bags Report
Project Costing and Profitability report for Spunbond Nonwoven Fabric Manufacturing in India
Project Costing for Baby Diaper manufacturing in India
 
 
 
 
 
 
 

ISO     Secure Merchant       ICICI Payment Gateway