Home > Management Dialogue
Kai Poehler Voith Paper GmbH & Co. KG

Kai Poehler
Senior Manager Application & Business Development - Specialty Paper , Voith Paper GmbH & Co. KG

The glass mat industry is growing by five to eight per cent annually. Kai Poehler, Senior Manager Application & Business Development - Specialty Paper, Voith Paper GmbH & Co. KG talks about the what makes it tick.

Which are the core areas where you work in technical textiles, and what is the growth potential in each niche?
Kai Poehler
Within Voith Paper, we are in the business line projects, globally responsible for wet-laid nonwovens and specialty paper and banknote paper. More than 33 per cent of our hydroformer (inclined wire) is for the glass mat industry. This industry is traditionally growing by five to eight per cent every year.
Which are your biggest markets and where does Asia feature in your growth strategy? Which are the countries seeking more of technical textile?
Kai Poehler
For glass mat, it is definitely the United States of America, followed by Europe. For Wet-laid and spunlaced nonwoven WLS, the interests are global, while most lines are being sold in China currently.
How has your business grown in the last two years and what is your target growth for the next two years?
Kai Poehler
Our growth mainly is in WLS. We have been very successful in the last two years. We have been able to increase our sales for hydroformer lines by 100 per cent. We expect two new lines in the market every year into the future.
What percentage of profits do you earmark for R&D annually? What new products can this vertical expect from Voith Paper during this fiscal?
Kai Poehler
On an average, we are investing around six per cent in R&D. The focus is on wet-laid process technology at the Voith wet-laid technology centre in Düren, where new end-products can be developed and debugged and their manufacturing can be verified on an inclined wire. The centre also develops and tests new units and individual machines for the wet-laid process. The hydroformer headbox has a formation width of 500 mm and is designed for a speed of 600 m/min. Trials can be carried out at speeds of between 10 m/min and 600 m/min and at basis weights of between 7 and 2000 g/m². The technology centre is equipped with two pulpers, three machine chests, a refiner and deflaker. The hydroformer headbox and closed white water loop are suitable for 1-, 2- and 3-ply tests. The paper and/or wet-laid nonwovens can be mechanically dewatered and reeled up with residual moisture content. These rolls (300-400 m) are suitable for transportation, such as for subsequent downstream processing. The inclined wire angle and relative angle of the loading board to the formation zone are adjustable so as to allow the best setting for different products to be identified.

In the Wet-laid Technology Centre, tests on the inclined wire can be done under production conditions. The investment risk can thus be minimised. In addition, operating parameters can be determined to prepare for system commissioning at the customer's paper mill. The clothing can also be tested and optimised beforehand. Due to the very low stock consistency of 0.01 - 0.1 per cent, the hydroformer is especially suitable for the production of long fibre papers and wet-laid nonwovens.

Key physical parameters can then be measured and evaluated in the adjacent laboratory.
What are the latest technological innovations going on in the field of nonwoven wipes and disposable hygiene?
Kai Poehler
The realisation of the new WLS process within less than two years, from the first ideas to the successful acceptance of a new line, is a tremendous success. The real innovation behind it is the combination of paper making knowledge with the nonwoven world. Specially, but not limited to, flushable wipes, this process opens multiple options for the product designer. We are convinced that this technology will also have an influence on the legislation and standardisation. With WLS, we will be able to produce flushable products only based on natural biological resources.
View comments on this interview Published on : 25 Jun 2015
Print Interview   |   Forward Link to friend   |   Bookmark and Share
Name Company
Designation Email
Country Phone/Mobile
Character Left:

Note : www.technicaltextile.net/ will publish as many comments as possible but cannot guarantee publication of all. www.technicaltextile.net/ also holds all rights reserved to omit/edit/upload the comments for reasons of clarity, brevity and morality.

Featured Partner

Marcel Alberts Marcel Alberts
Managing Director

Coating at a fibre level is a practice not usually seen in the high-performance fibres industry, des ...
Suresh Patel Suresh Patel
Managing Director
Sidwin Fabric

Sidwin Fabric is a manufacturer and exporter of polypropylene textiles and a wide range of nonwoven ...
Lynda Kelly Lynda Kelly
Senior Vice President
Suominen Corporation

Suominen Corporation is a manufacturer of nonwovens as roll goods for wipes and for hygiene products ...
Kevin Nelson Kevin Nelson
Chief Scientific Officer

Kevin Nelson, Chief Scientific Officer, TissueGen discusses the growing potential of biodegrable fib ...
Kerem Durdag Kerem Durdag
Biovation II LLC

Kerem Durdag, CEO, Biovation II LLC, provides an insight into future innovations in nonwoven healthc ...

Esteemed Clients