UBC team working on de-wrinkling textile composites
Home >> News

UBC team working on de-wrinkling textile composites
15
May '18
Professor Abbas Milani and graduate student Armin Rashidi using 3D scanning equipment to analyse textile composites. Courtesy: UBC
Professor Abbas Milani and graduate student Armin Rashidi using 3D scanning equipment to analyse textile composites. Courtesy: UBC
UBC scientists are working on de-wrinkling methods for textile composites. They have discovered that de-wrinkling can be improved by pulling the materials in two directions simultaneously during the manufacturing process. Textile composites are known for their strength and durability, but a simple wrinkle in the manufacturing process alters the end product.

Abbas Milani, a professor in UBC Okanagan’s School of Engineering, explains a simple wrinkle in the manufacturing process can significantly alter the end product—sometimes diminishing its strength by 50 per cent. Milani says wrinkling is one of the most common flaws in textile composites, which are widely used for prototypes, as well as mass production within prominent aerospace, energy, automotive and marine applications.

To iron out the problem, researchers at UBC’s Composite Research Network-Okanagan have investigated several de-wrinkling methods and have discovered that they can improve their effectiveness by pulling the materials in two directions simultaneously during the manufacturing process. They did this by creating a custom-made biaxial fixture—a clamp that stretches the textile taught and removes unwanted bumps and folds.

“The challenge was to avoid unwanted fibre misalignment or fibre rupture while capturing the out-of-plane wrinkles,” says graduate student Armin Rashidi. “Manufacturers who use these types of composites are looking for more information about their mechanical behaviour, especially under combined loading scenarios.”

The research included stretching the material and then using specialised image processing and 3D scanning to analyse the required forces and its impact on the wrinkling and de-wrinkling of the material.

“Composite textiles are changing the way products are designed and built in advanced manufacturing sectors,” says Milani, director of the Materials and Manufacturing Research Institute. “As we continue to innovate in the area of composite textiles to include more polymer resin and fibre reinforcement options, this research will need to continue in order to provide the most up-to-date analysis for manufacturers in different application areas.”

It is important for designers to be able to predict the right amount of force needed to diminish the wrinkles in the final product, explains Milani. To do this, his team of students has created a multi-step test to assess the magnitude of the required forces needed to smooth out wrinkles of different sizes that were formed at different shear angles of a comingled fibreglass-propylene plain weave fabric.

“Students in the Composites Research Network laboratory at UBC Okanagan are laying the groundwork to be world leaders in advanced textile composites by designing, fabricating and examining new testing equipment and fixtures, along with the development of high fidelity forming models.”

The research, recently published in the Materials & Design journal, was partially funded by the Natural Science and Engineering Research Council. (SV)

Fibre2Fashion News Desk – India

 
Cinte Techtextil 2018
 
Advertisements
RISI
 
 
 
 
 

Esteemed Clients


                                                                          
Everything is about to change. Stay Tuned !