Home / News / ETH scientists knit concrete structure

ETH scientists knit concrete structure

09 Nov '18

3 min read

Courtesy: ETHz

ETH researchers have developed a new technology by which they knit a textile that serves as the primary shaping element for curved concrete shells, by just pressing a button. They have used now the new technology to create a five-tonne concrete structure for an exhibition in Mexico City. The heart of the four metre tall curved concrete shell is knitted.

The structure’s formwork is a textile supported by a steel cable-net. The prototype KnitCandela marks the first application that this technology is being used on an architectural scale. The structure is homage to Spanish-Mexican architect Felix Candela (1910–1997) and result of a collaboration with Zaha Hadid Architects Computation and Design Group (ZHCODE), and Architecture Extrapolated (R-Ex).

The technology was developed at ETH Zurich. Following a digitally generated pattern, an industrial knitting machine produced the shuttering of the formwork for the shell structure: in 36 hours, it knitted a fully shaped, double-layered 3D textile consisting of four long strips. The lower layer forms the visible ceiling – a designed surface with a colourful pattern. The upper layer contains sleeves for the cables of the formwork system and pockets for simple balloons, which, after the entire structure is coated in concrete, become hollow spaces that help save on materials and on weight. Manufacturing a formwork for such a geometrically complex structure using conventional methods would cost substantially more in both time and material.

In the museum’s inner courtyard, the knitted formwork was tensioned between a temporary boundary frame and sprayed with a specially formulated cement mixture. This initial layer was just a few millimetres thick, but sufficient to create a rigid mould; once it hardened, conventional fibre-reinforced concrete was applied.

The knitted fabric was brought to Mexico City inside two suitcases - as normal checked baggage. The knit weighs only 25 kilograms and the cable net around 30. Taut in between the boundary frame, they supported over 5 tonnes of concrete curves.

The technology behind KnitCandela was developed by Mariana Popescu and Lex Reiter as part of Switzerland’s National Centre of Competence in Research (NCCR) in Digital Fabrication research project. Mariana Popescu is a doctoral student with Philippe Block, professor of Architecture and Structure at ETH Zurich, while doctoral student Lex Reiter studies with Robert Flatt, professor of Physical Chemistry of Building Materials.

Popescu’s research shows that employing knitted textiles in architectural applications cuts down on material, labour and waste, and simplifies the construction process for complex shapes. Matthias Rippmann, project manager for KnitCandela and senior researcher in the Block Research Group, says: “It took only five weeks from the initial work until completion – much less time than if we were using conventional technology.”

KnitCandela also represents an evolution of the flexible forming system developed for the HiLo roof: a doubly curved, thin-shell concrete structure the Block Research Group developed for Empa’s research and innovation building NEST in 2017. For KnitCandela, the ETH researchers produced the knitted shell in one go, whereas HiLo’s shell was made of a network of steel cables and a sewn textile.

Popescu says: “Knitting offers a key advantage that we no longer need to create 3D shapes by assembling various parts. With the right knitting pattern, we can produce a flexible formwork for any and all kinds of shell structures, pockets and channels just by pressing a button.” (SV)

Fibre2Fashion News Desk – India

Construction Textiles

Leave your Comments

RECOMMENDED

EU launches strategy for leadership in advanced materials sector
Construction Textiles

STFI to showcase lightweight construction innovations at JEC World
Construction Textiles

Ahlstrom completes major investment at Madisonville plant in US
Construction Textiles

Rivertex Australia managing director Gavin Hodgins. Pic: Rivertex

Newly established Rivertex Australia gets Gavin Hodgins as MD
Construction Textiles

Europe’s Ahlstrom launches new FibRoc solution for plasterboard market
Construction Textiles

US’ Owens Corning’s sales rise 16% to $2.6 bn in Q2 FY22
Construction Textiles

WSU researchers use disposable masks to make durable concrete
Construction Textiles

Scott Bader expands Crestabond structural adhesives to North America
Construction Textiles

ETH scientists knit concrete structure

Leave your Comments

Weekly technical textiles newsletter

ABOUT TECHNICAL TEXTILES

Main LINKS

Quick Links

Follow us