With this innovation Premium Aerotec is further expanding the range of uses for thermoplastic CFRP (carbon fibre reinforced plastic) in the aircraft fuselage shell significantly beyond its current application for small parts, said Premium Aerotec in a media statement. In collaboration with its partners, Premium Aerotec is thus demonstrating its unique skill in developing and producing large aircraft components from thermoplastic CFRP.
The demonstrator is the second generation of the thermoplastic welded pressure bulkhead. Its predecessor celebrated its world première at ILA 2018 in Berlin. The 1:1 demonstrator for a plane in the Airbus A320 series was built from eight equally sized thermoplastic CFRP components. These are joined to each other using state-of-the-art CFRP welding technology. The entire development and design were undertaken by Premium Aerotec, manufacturing of the individual components was undertaken by the Institute for Composite Materials (IVW) in Kaiserslautern.
In comparison to the current traditional pressure bulkhead for the A320 product family, made of riveted aluminium components, the thermoplastic CFRP version offers the same mechanical properties but with a saving in weight of around 10-15 per cent. The reduction in production time of around 50 per cent means reduced manufacturing costs. The thermoplastic pressure bulkhead offers all the characteristics needed for a next generation aircraft.
Premium Aerotec is able to draw on many years of experience in the use of thermoplastic materials for smaller components for the A350 XWB, for connecting CFRP frames to CFRP skin sections, for example. Premium Aerotec manufactures over 2,000 such clips per aircraft using a highly automated process.
Because of the machinery and systems involved, the process of heating, shaping and cooling pre-impregnated CFRP semi-finished products (prepegs) was previously difficult to apply to large-scale aircraft components. In addition to introducing it into serial production for the A350 XWB, Premium Aerotec was also working on making this technology usable for larger components such as integral frames. The full-scale demonstrator, displayed in mounting conditions, at the Paris Air Show, exhibited a degree of technical maturity far beyond the concept phase – laying a significant part of the foundations for the next generation of CFRP aircraft fuselage shells. (PC)
Fibre2Fashion News Desk – India